Sony CDX-GT610UI Instruction Manual - Page 20

An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Set "MONO-OFF" (page 13). USB playback You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub, and is not compatible with a device that has a hub function. Cannot play back items. • Play back music files are protected by Digital Rights Management (DRM) technology (page 15). • Play back items on non-Mass Storage Class USB devices only. • If a USB device does not work, reconnect it. A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Error displays/Messages BLANK*1 Tracks have not been recorded on the MD.*2 t Play an MD with recorded tracks. CHECKING The unit is confirming the connection of a USB device. t Wait until confirming the connection is finished. ERROR*1 • The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. t Insert another disc. • USB device was not automatically recognized. t Reconnect it again. FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. HUB NO SUPRT USB hub or devices that have a hub function are not supported on this unit. LOAD The changer is loading the disc. t Wait until loading is complete. L. SEEK +/- The local seek mode is on during automatic tuning. 20 NO DEV (No Device) (SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. NO DISC The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO INFO Text information is not written in the MP3/WMA/ AAC files or ATRAC CD. NO IPOD No iPod connected. t Connect iPod to dock connector. NO MAG The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO MUSIC The disc/USB device does not contain a music file. t Insert a music CD in this unit or MP3 playable changer. t Connect a USB device with a music file in it. NO NAME A disc/album/group/track/artist/playlist name is not written in the track. NOT READ The disc information has not been read by the unit. t Load the disc, then select it on the list. NOTREADY The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. OVERLOAD USB device is overloaded. t Disconnect the USB device, then change the source by pressing (SOURCE). t Indicates that the USB device is out of order, or an unsupported device is connected. READ The unit is reading all track and group/album information on the disc/USB device. t Wait until reading is complete and playback starts automatically. Depending on the disc/USB device structure, it may take more than a minute. RESET The CD unit and CD/MD changer cannot be operated due to a problem. t Press the RESET button (page 4). USB NO SUPRT (USB Not Support) The connected USB device is not supported. t Connect a USB device of Mass Strage Class (page 15).