Sony CDX-GT740UI Operating Instructions - Page 17
Operating an iPod directly, Passenger control, Changing the sound settings
UPC - 027242774391
View all Sony CDX-GT740UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operating an iPod directly - Passenger control You can operate an iPod connected to the dock connector directly. 1 During playback, press and hold (MODE). "Mode iPod" appears and you will be able to operate the iPod directly. To exit the passenger control Press and hold (MODE). Then "Mode Audio" will appear and the play mode will change to "Resuming Mode." Notes • The volume can be adjusted only by the unit. • If this mode is canceled, the repeat setting will be turned off. Other functions Changing the sound settings Adjusting the sound characteristics 1 Press the control dial. 2 Rotate the control dial until the desired menu item appears, then press it. Depending on the setting, by rotating the control dial again, further parameters can be set. 3 Rotate the control dial to select the setting, then press it. 4 Press (BACK). The setting is complete and the display returns to normal play/reception mode. The following items can be set: EQ3 Parametric Preset Selects an equalizer curve from 7 music types. EQ3 Parametric Tune*1 Custom equalizer settings. Subwoofer Tune & LPF Phase Selects the phase (effective only when LPF is on): "Normal," "Reverse." FREQ Selects the subwoofer cut-off frequency: "80Hz," "100Hz," "120Hz," "140Hz," "160Hz," "OFF." Level Adjusts the subwoofer volume: "+10dB" - "0dB" - "-10dB." ("- ∞" is displayed at the lowest setting.) HPF & Speaker Select Speaker Selects the Speaker: "All," "Front", or "Rear." FREQ Selects the cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." DSO (Dynamic Soundstage Organizer) Creates a more ambient sound field. To select the DSO mode: "1," "2," "3," or "off." The larger the number, the more enhanced the effect. continue to next page t 17