Sony CDX-M670 Primary User Manual (English, Español, Fran&ccedi - Page 35
Error displays/Messages
View all Sony CDX-M670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Automatic tuning is not possible. • The local seek mode is set to "on." t Set the local seek mode to "off" (page 26). • The broadcast signal is too weak. t Perform manual tuning. The "ST" indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. t Set to the monaural reception mode (page 26). A program broadcast in stereo is heard in monaural. • The unit is in monaural reception mode. t Cancel monaural reception mode (page 26). Interference occurs during FM reception. The wide mode is selected. t Set the IF mode to "IF Auto" (page 26). DSP functions (CDX-M770 only) No sound, or sound is too low. The volume of the speakers may have been automatically lowered in order to maximize the effect of the listening position adjustment. t Press < or , to adjust the balance. The speaker balance can be set separately for DSP on mode and DSP off mode (page 20). Error displays/Messages Error displays (For this unit and optional CD/MD changers) The following indications will flash for about 5 seconds, and an alarm sound will be heard. Blank*1 No tracks have been recorded on an MD*2. t Play an MD with recorded tracks on it. Error*1 • A CD is dirty or inserted upside down*2. t Clean or insert the CD correctly. • A CD/MD cannot play because of some problem*2. t Insert another CD/MD. High Temp The ambient temperature is more than 50°C (122°F). t Wait until the temperature goes down below 50°C (122°F). NO Disc No disc is inserted in the CD/MD unit. t Insert discs in the CD/MD unit. NO Mag The disc magazine is not inserted in the CD/ MD unit. t Insert the magazine in the CD/MD unit. Not Ready The lid of the MD unit is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. Push Reset The CD/MD unit cannot be operated because of some problem. t Press the reset button on the unit. *1 When the CD/MD changer is connected to the unit, the disc number of the CD or MD appears in the display. *2 The disc number of the disc causing the error appears in the display. If these solutions do not help improve the situation, consult your nearest Sony dealer. Messages LCL Seek +/- The Local Seek mode is on during automatic tuning (page 14). " " or " " You have reached the beginning or the end of the disc and you cannot go any further. 35