Sony CDX-M730 Primary User Manual - Page 21
Labeling a Motion Display, Additional Information, Maintenance
View all Sony CDX-M730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Labeling a Motion Display You can label a Motion Display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display in the M.Dspl on mode (the display remains lit even when the power is off). 1 Press (OFF). CD/MD playback or radio reception stops (the key illumination and display remain on). 2 Press (MENU), then press M or m repeatedly until "Name Input" appears. 3 Press (ENTER). Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. 4 Enter the characters. 1 Press (DSPL) to select the character type. A t a t 0 t A 2 Press M*1 repeatedly to select the desired character. A t B t C t ... x t y t z t 0 t 1 t 2 ... t ! t " t # ... t *2 t A *1 For reverse order, press m. *2 (blank space) 3 Press , after locating the desired character. Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. If you press