Sony CDX-M7810 Operating Instructions - Page 11
Setup, Display, Receive Mode, Sound
View all Sony CDX-M7810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setup y Display y Receive Mode y Sound y Edit y List 3 Rotate the SEEK control dial until desired setting item appears, then press (ENTER). The digital indication moves to the right (setting selection) side. 4 Rotate the SEEK control dial to select the setting, then press (ENTER). The setting is complete. 5 Press (MENU). The display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. With the card remote commander In steps 2 and 3: press M or m instead of the SEEK control dial; in step 4, press < or , instead of the SEEK control dial. The following items can be set (follow the page reference for details): "z" indicates the default settings. Setup Clock Adjust (page 4) Beep To set "on" (z) or "off." AUX-A*1 (AUX Audio) To turn the AUX source display "on" (z) or "off" (page 13). Display Clock (Clock Information) To display the clock and the display items/image at the same time. - "on": to display at the same time. - "off" (z): to not display at the same time. A.IMG (Auto Image) Auto Image mode automatically steps (every 10 seconds) through the display images. - "off" (z): to not change the image automatically. - "SA": to step repeatedly through the display images of Spectrum analyzer. - "Movie": to step repeatedly through the display images of Movie mode. - "All": to step repeatedly through the display images in all display modes. Info (Display Information) To display the items (depending on the source, etc.) at the middle of the display while a image is displayed. - "on" (z): to display the items. - "off": to not display any items. Dimmer To change the brightness of the display. - "Auto" (z): to dim the display automatically when you turn lights on. - "on": to dim the display. - "off": to deactivate the dimmer. Demo*1 (Demonstration) To set "on" (z) or "off" (page 4). A.Scroll (Auto Scroll) To scroll long displayed item automatically when the disc/group/track is changed. - "on": to scroll. - "off" (z): to not scroll. Receive Mode Local (Local seek mode) - "on": to only tune into stations with stronger signals. - "off" (z): to tune normal reception. Mono (Monaural mode) To improve poor FM reception, select monaural reception mode. - "on": to hear stereo broadcasts in monaural. - "off" (z): to hear stereo broadcast in stereo. IF - "Auto" (z): to narrow automatically the reception frequency to eliminate noise. - "Wide"*2: to always hear FM stereo broadcasts in stereo and with full the frequency signal reception. Sound EQ7 Tune (page 9) HPF (High Pass Filter) To select the front/rear speaker cut-off frequency: "off" (z), "78Hz" or "125Hz." LPF (Low Pass Filter) To select the subwoofer cut-off frequency: "off" (z), "125Hz" or "78Hz." Loudness To enhance bass and treble at lower volume. - "on": to reinforce bass and treble. - "off" (z): to not reinforce bass and treble. AUX Level To adjust the volume level for each connected auxiliary equipment (page 13). This setting negates the need to adjust the volume level between sources. continue to next page t 11