Sony CDX-M8805X Operating Instructions - Page 6
Precautions - problems
View all Sony CDX-M8805X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
*7 Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. *8 The CAT button is available only when the XM tuner is connected. Selecting a disc and album Disc and album can be skipped using the DISC (ALBUM) (M/m) buttons. (With this unit) To Press Skip albums*9 M or m [once for each - Album selection album] To continuously skip albums, press and hold either button. (With optional unit) To Press Skip discs - Disc selection M or m [once for each disc] To continuously skip discs, press once and press again within about 1 second (and hold) either button. Skip albums*9 M or m [hold for a moment] - Album selection and release. To continuously skip albums, press (and hold) within about 1 second of first releasing the button. Precautions • If your car has been parked in direct sunlight, allow the unit to cool off before operating it. • Power antenna will extend automatically while the unit is operating. Caution While driving, do not use the CUSTOM FILE feature or any other functions which may divert your attention from the road. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. To maintain high sound quality Be careful not to splash juice or other soft drinks onto the unit or discs. *9 Available only when an MP3 file is played. Skipping tracks continuously Press once either SEEK/AMS (< or ,) button, then press again within about 1 second and hold. 6