Sony CDX-M8815X Operating Instructions - Page 9
Changing the sound settings
View all Sony CDX-M8815X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Receiving a station through a list - LIST You can list up the frequency or the name. For details on labeling a station, see page 10. 1 Select the band, then press (LIST). The frequency or station name appears. 2 Press M or m repeatedly until the desired station appears. 3 Press (ENTER) to receive the station. Other functions Changing the sound settings Adjusting the sound characteristics You can adjust the bass, treble, balance, fader and subwoofer volume. 1 Select a source, then press (SOUND) repeatedly to select the desired item. The item changes as follows: BASS (bass) t TREBLE (treble) t BALANCE (left-right) t FADER (front-rear) t SUB (subwoofer volume)* * " ∞" is displayed at the lowest setting, and can be adjusted up to 20 steps. 2 Press < or , repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Note Adjust within 3 seconds of selecting the item. Adjusting the equalizer curve - EQ7 Tune You can adjust and store the equalizer settings for different tone ranges. 1 Select a source, then press (MENU). 2 Press M or m repeatedly until "EQ7 Tune" appears, then press (ENTER). 3 Press < or , repeatedly to select the desired equalizer type, then press (ENTER). 4 Press < or , repeatedly to select the desired frequency. The frequency changes as follows: 62Hz y 157Hz y 396Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16kHz 5 Press M or m repeatedly to adjust the desired volume level. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. continue to next page t 9