Sony CDX-R505X Manual de instrucciones - Page 18

Radio reception The stations cannot be received. The sound is hampered by noises. • Connect a power antenna control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna booster (only when your car has built-in FM/AM antenna in the rear/side glass). • Check the connection of the car antenna. • The auto antenna will not go up. t Check the connection of the power antenna control lead. • Check the frequency. • When the DSO mode is on, the sound is sometimes hampered by noises. t Set the DSO mode to "off" (page 7). Preset tuning is not possible. • Store the correct frequency in the memory. • The broadcast signal is too weak. Automatic tuning is not possible. • The local seek mode is set to "on." t Set to "Local-off" (page 11). • The broadcast signal is too weak. t Perform manual tuning. During FM reception, the "ST" indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. t Set to "Mono-on" (page 11). An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Set to "Mono-off" (page 11). Interference occurs during FM reception. IF mode is set to "Wide." t Set to "IF Auto" (page 11). 18 Error displays/Messages Blank*1 Tracks have not been recorded on the MD.*2 t Play an MD with recorded tracks. Error*1 • The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play because of some problem. t Insert another disc. Failure (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the XM tuner is connected, storing an XM radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. Load The changer is loading the disc. t Wait until loading is complete. Local Seek +/- The local seek mode is on during automatic tuning. NO Data All custom names have been deleted, or none are stored. NO Disc The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO Disc Name A disc name is not written in the track. NO Group Name A group name is not written in the track. NO ID3 Tag ID3 tag information is not written in the MP3 file. NO Info Text information is not written in the ATRAC3/ ATRAC3plus file. NO Magazine The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO Music The disc is not a music file. t Insert a music CD in this unit or MP3 playable changer. NO Track Name A track name is not written in the track. Not Read The disc information has not been read by the unit. t Load the disc, then select it on the list. Not Ready The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly.