Sony CDXGT530UI Operating Instructions - Page 16
Adjusting setup items - SET
UPC - 027242744493
View all Sony CDXGT530UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Rotate the control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. Repeat steps 3 and 4 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. 5 Press (BACK). The setting is complete and the display returns to normal play/reception mode. Tip Other equalizer types are also adjustable. Adjusting setup items - SET 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until the desired item appears. 3 Rotate the control dial to select the setting (example "ON" or "OFF"). 4 Press and hold the select button. The setup is complete and the display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 6) BEEP Activates the beep sound: "ON," "OFF." AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 17). A.OFF (Auto Off) Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (seconds)," "30M (minutes)," "60M (minutes)." SUB/REAR*1 Switches the audio output: "SUB-OUT" (subwoofer), "REAR-OUT" (power amplifier). DEMO (Demonstration) Activates the demonstration: "ON," "OFF." DIM (Dimmer) Changes the display brightness: "ON," "OFF." M.DSPL (Motion Display) Selects the Motion Display mode. - "SA": to show moving patterns and spectrum analyzer. - "OFF": to deactivate the Motion Display. A.SCRL (Auto Scroll) Scrolls long items automatically: "ON," "OFF." LOCAL (Local Seek Mode) - "ON": to only tune into stations with stronger signals. - "OFF": to tune normal reception. MONO*2 (Monaural Mode) Selects monaural reception mode to improve poor FM reception: "ON," "OFF." Z.TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 9 seconds)," "Z.TIME-3 (about 30 seconds)." LPF*3 (Low Pass Filter) Selects the subwoofer cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LPF NORM/REV*3 (Low Pass Filter Normal/ Reverse) Selects the phase when the LPF is on: "NORM," "REV." HPF (High Pass Filter) Selects the front/rear speaker cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LOUD (Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." BTM (page 11) *1 When the unit is turned off. *2 When FM is received. *3 When the audio output is set to "SUB-OUT." 16