Sony CFD-E75 Operating Instructions (primary manual) - Page 27
Troubleshooting, General, CD Player
View all Sony CFD-E75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. • Do not stick paper or sticker on the CD, nor scratch the surface of the CD. • After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Notes on cassettes • Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape. Troubleshooting General The power is not on. • Connect the AC power cord to the AC IN socket and a wall outlet securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate the player on batteries. There is no audio. • Unplug the headphones when listening through speakers. The power is turned off abruptly. • Replace all the batteries with new ones. Unusual sound is heard. The sound is noisy, weak or has poor quality. • Replace all the batteries with new ones if they are weak. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. c Move the portable telephone, etc., away from the player. Side A Tab for side A Tab for side B • The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. CD Player "no diSC" lights in the display even when a CD is in place. • Place the CD with the label surface up. • The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. • There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. The CD does not play. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. continued 27