Sony CFD-V17 Operating Instructions (primary manual) - Page 22

Troubleshooting (continued) Tape Player Symptom The tape does not move when you press an operation button. The REC r button does not function/The tape does not play. The tape does not erase completely. The tape does not record. The audio is weak/The audio quality is poor. The sound is distorted. Remedy • Close the cassette compartment securely. • Make sure the safety tab on the cassette is in place. • Make sure the FUNCTION selector is set to CD, AM or FM. • Clean the erasing heads (see page 23.) • Replace all the batteries with new ones if they are weak. • The source which was recorded on TYPE II (high position) or TYPE IV (metal) tape using this unit is being played. Record on TYPE I (normal) tape and play. • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place. • Clean the heads, pinch roller and capstan (See page 23). • Demagnetize the heads using a demagnetizer (see page 23). • The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. 22 Additional Information