Sony CMT-A70 Operating Instructions - Page 41

Troubleshooting General The power is not on. • Connect the AC power cord to a wall outlet securely. There is no audio. • Press ?/1 to turn on the player. • Adjust the volume. • Unplug the headphones when listening through speakers. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. t Move the portable telephone, etc., away from the player. CD Player "No Disc" lights on the display even when a CD is in place. • Place the CD with the label surface up. • The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. • There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. • The CD-R/CD-RW is blank. The CD does not play. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged. • Place the player in a location free from vibration. • Clean the lens with a commercially available blower. • The sound may drop out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. "No File" is displayed. • You are trying to play a CD-R/CD-RW that does not contain an ATRAC file or MP3 file. (page 4) Radio The audio is weak or has poor quality. • Move the player away from the TV. The picture of your TV becomes unstable. • If you are listening to an FM program near the TV with an indoor antenna, move the player away from the TV. continued 41