Sony CMT-EP303 Primary User Manual - Page 9

CD Programing the CD tracks - Program Play You can make a program of up to 28 tracks in the order you want them to be played. 1 Press CD (CD/REMAIN on the remote), then place a CD. 2 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote) repeatedly until "00 PR.01" appears in the display. 3 Turn ./> clockwise or counterclockwise (or press . or > on the remote) until the desired track appears in the display. Programed step number To Do this Check the total number of programed tracks Press ENTER/PGM (TUNER MEM/ENTER/PGM on the remote) repeatedly in stop mode. Each time you press the button, the selected track number and the programed step number appear in the display in turn. Cancel Program Press x twice until "PROGRAM" Play disappears from the display. The program you made will be erased. Tip The program you made remains after Program Play finishes. When Program Play remains in the system's memory, "PROGRAM" flashes. To play the same program again, press CD (CD/REMAIN on the remote) and ENTER/PGM (TUNER MEM/ENTER/ PGM on the remote), then press u. Selected track number (including selected track) 4 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote). The track is programed. The next program step number appears, and "PROGRAM" flashes. 5 To program additional tracks, repeat steps 3 to 4. 6 Press u. Program Play starts. 9GB