Sony CMT-FX300i Operating Instructions - Page 1

Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. License and Trademark Notice iPod is a trademark of Apple Inc., registered in the U.S. and other countries. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. All other trademarks and registered trademarks are of ® their respective holders. In this manual, TM and marks are not specified. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. CAUTION The use of optical instruments with this product will increase eye hazard. Except for customers in the U.S.A. and Canada This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Notice for the customers in the U.S.A. and Canada This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Owner's Record The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Unit Remote This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. To use the remote Slide and remove the battery compartment lid, and insert the two R6 (size AA) batteries,  side first, matching the polarities shown below. Notes on using the remote With normal use, the batteries should last for about six months. Do not mix an old battery with a new one or mix different types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. When carrying this system 1 Remove a disc to protect the CD mechanism. 2 Press  (power)  on the unit to turn off the system and confirm that "STANDBY" stops flashing. 3 Unplug the power cord. To set the clock 1 Press to turn on the system. 2 Press TIMER MENU  to select the clock set mode. If "PLAY SET" flashes, press repeatedly to select "CLOCK," and then press (enter) . 3 Press repeatedly to set the hour, then press . 4 Use the same procedure to set the minutes. Note The clock settings are lost when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY . The clock is displayed for about 8 seconds. Getting Started  FM lead antenna (Extend it horizontally.)  AM loop antenna  To right speaker  To wall outlet  Antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise.  Speakers Insert only the stripped portion of the cord.  Power Connect the power cord to a wall outlet. If the plug does not fit the wall outlet, detach the supplied plug adaptor (only for models equipped with an adaptor).  Speaker cord (Red/)  Speaker cord (Black/)  To left speaker To use the iPod Insert an iPod Dock Adapter into the iPod Dock  before use. iPod Dock Adapter iPod Connector To remove the iPod Dock Adapter, pull it up with your fingernail or a flat object using the slot inside the adapter. Note The iPod Dock Adapter is not supplied with the system. Use the adapter supplied with your iPod when using an iPod model. For details on the iPod Dock Adapters, refer to the instructions supplied with the iPod Dock Adapters. To connect an optional headphones Connect headphones to the PHONES jack  on the unit. Operations Playing a CD/MP3 disc 1 Select the CD function. Press FUNCTION +/  repeatedly. 2 Place a disc. Press  PUSH OPEN/CLOSE  on the unit, and place a disc with the label side up on the CD compartment. To close the CD compartment, press  PUSH OPEN/ CLOSE  on the unit. 3 Start playback. Press  (play) . Other operations To Pause playback Stop playback Select a folder on an MP3 disc Select a track or file Find a point in a track or file Select Repeat Play Press  (pause) . To resume play, press the button again.  (stop) . (select folder) +/  repeatedly.  (go back) / (go forward) . Hold down  (rewind) / (fast forward)  during playback, and release the button at the desired point. REPEAT  repeatedly until "REP" or "REP1" appears. To change the play mode Press PLAY MODE  repeatedly while the player is stopped. You can select normal play (" " for all MP3 files in the folder on the disc), shuffle play ("SHUF" or " SHUF*" for folder shuffle), or program play ("PGM"). * When playing a CD-DA (audio) disc, (SHUF) Play performs the same operation as normal (SHUF) Play. Note on Repeat Play "REP1" indicates that a single track or file is repeated until you stop playback. Note on shuffle play mode When you turn off the system, the selected shuffle play mode ("SHUF" or " SHUF") is cleared and the play mode returns to normal play mode (" "). Notes on playing MP3 discs Do not save other types of tracks or files, or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of ".mp3". Even when file name has the ".mp3" file extension, if the actual file differs, playing this file may generate a loud noise which could damage the speaker system and the system may malfunction. The maximum number of: folders is 255 (including the root folder). MP3 files is 512. folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Notes on playing multisession discs If the first session on the disc is a CD-DA session, the other sessions on the disc cannot be recognized regardless of the session format; only CD-DA tracks in the first session can be played back. If the session format for the first session is CD-ROM and the following sessions are recorded in the same format, the system will continue to play back MP3 files accordingly in multiple sessions until the system encounters another session recorded in a different format. Listening to the radio 1 Select "TUNER FM" or "TUNER AM." Press FUNCTION +/  repeatedly. 2 Perform tuning. For automatic scanning Press TUNING MODE  repeatedly until "AUTO" appears, and then press Scanning stops automatically when a station is tuned in, and "TUNED" and "ST" (for stereo programs only) light up in the display. If "TUNED" does not light up and the scanning does not stop, press   to stop scanning, then perform manual tuning (below). For manual tuning Press TUNING MODE  repeatedly until "MANUAL" appears, and then press repeatedly to tune in the desired station. Tip To reduce static noise on a weak FM stereo station, press FM MODE  repeatedly until "MONO" appears to turn off stereo reception. Presetting radio stations 1 Tune in the desired station. 2 Press TUNER MEMORY  to select the tuner memory mode. 3 Press repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. 4 Press  to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 6 To call up a preset radio station, press TUNING MODE  repeatedly until "PRESET" appears, and then press repeatedly to select the desired preset number. Creating your own program (Program Play) 1 Select the CD function. Press FUNCTION +/  repeatedly. 2 Select the play mode. Press PLAY MODE  repeatedly until "PGM" appears while the player is stopped. 3 Select the desired track or file number. Press repeatedly until the desired track or file number appears. When programming MP3 files, press +/  repeatedly to select the desired folder, and then select the desired file. Selected track or file number Total playing time of the selected track or file 4 Program the selected track or file. Press  to enter the selected track or file. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press  . The program remains available until you open the CD compartment. To play the same program again, press  . To cancel Program Play Press PLAY MODE  repeatedly until "PGM" disappears while the player is stopped. To delete the last track or file of the program Press CLEAR  while the player is stopped. To view program information, such as total track number of the program Press DISPLAY  repeatedly. Playing the iPod 1 Select the iPod function. Press FUNCTION +/  repeatedly. 2 Place the iPod. 3 Start playback. Press  . To control the iPod To Pause playback Scroll up/down the iPod menus Select a track or chapter of audiobook/ podcast Choose the selected item Find a point in a track or chapter of audiobook/ podcast Return to the previous menu or select a menu Press To fast-forward or fast-rewind, hold down the button. Hold down during playback, and release the button at the desired point.  /TOOL MENU /RETURN  (return) . To use the system as a battery charger You can use the system as a battery charger for the iPod when the system is on. The charging begins when the iPod is placed on the iPod connector. The charge status appears in the iPod display. For details, see the user's guide of your iPod. To stop charging the iPod Remove the iPod. Turning off the system also stops charging the iPod. Notes When placing or removing the iPod, handle the iPod in the same angle as that of the iPod connector on the unit and do not twist or sway the iPod to prevent connector damage. Do not carry the unit with an iPod set on the connector. Doing so may cause a malfunction. When placing or removing the iPod, brace the unit with one hand and take care not to press the controls of the iPod by mistake. Before disconnecting the iPod, pause playback. Hold down to fast-forward (fast-rewind) while playing video if does not function. To change the volume level, use VOLUME +/ . The volume level does not change even if adjusted on the iPod. The iPod Dock  on the unit is designed for iPod only. You cannot connect any other portable audio players. To use an iPod, refer to the user's guide of your iPod. Sony cannot accept responsibility in the event that data recorded to iPod is lost or damaged when using an iPod with this unit.