Sony CMT-GPX6 Operating Instructions - Page 28
Specifications, AUDIO POWER SPECIFICATIONS - hcd
![]() |
View all Sony CMT-GPX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
To save a tape permanently To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. Break off the cassette tab If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. Before placing a cassette in the tape deck Take up any slack in the tape. Otherwise, the tape may get entangled in the parts of the tape deck and become damaged. When using a tape longer than 90 minutes The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. The tape may get entangled in the tape deck. Cleaning the tape heads Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. Use a separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette. Demagnetizing the tape heads Demagnetize the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette. Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (The United States model only) With 6 ohm loads, both channels driven, from 120-10,000 Hz; rated 35 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Main unit (HCD-GPX7/HCD-GPX6/HCDGPX5) Amplifier section HCD-GPX7 for CMT-GPX7 Argentine model: DIN power output (rated): 40 + 40 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 55 + 55 W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 100 + 100 W Other models: DIN power output (rated): 40 + 40 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 60 + 60 W (6 ohms at 1 kHz, 10% THD) Music power output (reference): 100 + 100 W HCD-GPX6 for CMT-GPX6 North American model: Continuous RMS power output (reference): 40 + 40 W (6 ohms at 1 kHz, 10% Other models: THD) The following measured at AC 240 V, AC 220 V or AC 120 V DIN power output (rated): 30 + 30 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 35 + 35 W (6 ohms at 1 kHz, 10% THD) 28GB
![](/manual_guide/products/sony-cmtgpx6-operating-instructions-66283f7/28.png)