Sony CPD-120VS Operating Instructions (primary manual) - Page 10

Getting Started Before using this display, please make sure that the following items are included in your package: • Multimedia computer display (1) • Power cord (1) • USB cable (1) • Warranty card (1) • Operating instruction manual (1) • Windows 95 Monitor Information Disk and its instruction manual (1) ck!, Tip This display will sync with any IBM or compatible system equipped with VGA' ) or greater graphics capability. Although this display will sync to other platforms running at horizontal frequencies between 30 and 70 kHz, including Macintosh2 and Power Macintosh systems, a cable adapter is required. Please consult Sony Technical Support for advice on which adapter is suitable for your needs. 1) VGA is a trademark of IBM Corporation. 2) Macintosh is a trademark of Apple Computer Inc. Installation • Step 1: Connect the computer With the computer switched off, connect the video signal cable to the display (VGA) connector on your computer. If your computer supports the DDC plug-and-play standard, this connection will enable the DDC communication between the display and the computer. Also the video signal cable is combined with audio and microphone cables. If your computer is equipped with sound capability, connect the audio and microphone plugs to appropriate jacks located on your computer. If you use a USB (universal serial bus) device, connect the USB device to the USB downstream jack and the PC to the USB upstream jack. 10 Getting Started