Sony CPD-17SF2 Operating Instructions - Page 8

Plug and Play This monitor complies with the DDC1™∗ and DDC2B™∗ which are the Display Data Channel (DDC) standards of VESA. When a DDC1 host system is connected, the monitor sycnchronizes with the V. CLK in accordance with the VESA standards and outputs the EDID (Extended Display Indentification) to the data line. When a DDC2B host system is connected, the monitor automatically switches to the DDC2B communication. ∗ DDC™ is a trade mark of the non-profit organization, Video Electronics Satandard Association. Use of the Tilt-Swivel With the tilt-swivel, this unit can be adjusted to be viewed at your desired angle within 90˚ horizontally and 20˚ vertically. To turn the unit vertically and horizontally, hold it at its bottom with both hands. 15° 45° 45° 5° Damper Wire Using a white background, very thin horizontal stripes on the screen are visible as shown on the illustration. These stripes are damper wires. These wires are attached to the aperture grille inside the Trinitron tube and are there to damp vibrations of the aperture grille in order to prevent them from influencing to the picture quality. Damper wire Approx. 6 cm (Multiscan 17sfII only) Specifications CPD-15SF2 Picture tube 0.25 mm aperture grille pitch 15␣ inches measured diagonally (14" maximum viewing image) 90-degree deflection Video image area Approx. 285 × 213 mm (w/h) (11 1/4 × 8 1/2 inches) Logical resolution Horizontal: Max. 1280 dots Vertical: Max. 1024 lines Physical resolution Horizontal: Max. 1024 dots Vertical: Max. 768 lines Standard image area Approx. 270 × 202 mm (w/h) (10 3/4 × 8 inches) Deflection frequency Horizontal: 31 to 65 kHz Vertical: 50 to 120 Hz AC input voltage/current 100 to 120 V, 50/60 Hz, 1.8 A 220 to 240 V, 50 - 60 Hz, 1 A Dimensions Approx. 368 × 373 × 384.5 mm (w/h/d) (14 1/2 × 14 3/4 × 15 1/4 inches) Mass Approx. 13.8 kg (30 lb 7 oz) CPD-17SF2 Picture tube 0.25 mm aperture grille pitch 17␣ inches measured diagonally (16" maximum viewing image) 90-degree deflection Video image area Approx. 328 × 242 mm (w/h) (13 × 9 5/8 inches) Logical resolution Horizontal: Max. 1280 dots Vertical: Max. 1024 lines Physical resolution Horizontal: max. 1280 dots Vertical: Max. 1024 lines Standard image area Approx. 300 × 225 mm (w/h) (11 7/8 × 8 7/8 inches) Deflection frequency Horizontal: 31 to 65 kHz Vertical: 50 to 120 Hz AC input voltage/current 100 to 120 V, 50/60 Hz, 1.8 A 220 to 240 V, 50 - 60 Hz, 1 A Dimensions Approx. 406 × 426.5 × 451 mm (w/h/d) (16 × 16 7/8 × 17 7/8 inches) Mass Approx. 19.0 kg (41 lb 14 oz) Design and specifications are subject to change without notice. Approx. 6 cm 8