Sony CPD-G400 Operating Instructions - Page 6
Setup - manuals
UPC - 027242559219
View all Sony CPD-G400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord • Macintosh adapter (1) • Windows Monitor Information Disk • Warranty card • Notes on cleaning the screen's surface • This instruction manual Step 1: Connect your monitor to your computer Turn off the monitor and computer before connecting. Notes • Do not touch the pins of the video signal cable connector as this might bend the pins. • When connecting the video signal cable, check the alignment of the HD15 connector. Do not force the connector in the wrong way or the pins might bend. x Connecting to an IBM PC/AT or compatible computer AC IN (HD15) 1 (HD15) 2 x Connecting to a Macintosh or compatible computer Use the supplied Macintosh adapter. AC IN (HD15) 1 (HD15) 2 Macintosh adapter (supplied)* Macintosh or to video compatible computer output * Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh and Power Macintosh G3 series computers (sold before January, 1999). If you are connecting to a Power Macintosh G3 series that sold after January 1999, you will need a different adapter (not supplied). Macintosh II series and some older versions of PowerBook models may need an adapter with micro switches (not supplied). x Connecting to a second computer AC IN (HD15) 1 (HD15) 2 to video output IBM PC/AT or compatible computer to video input 2 connector (y 2) Refer to the preceding examples to connect your computer. HD15 video signal cable (not supplied) 6