Sony CX20 Operating Instructions - Page 40

Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, projection system LCD panel VPL-CX20: 0.63-inch XGA panel, approximately 2,360,000 pixels (786,432 pixels × 3) VPL-CS20: 0.63-inch SVGA panel, approximately 1,440,000 pixels (480,000 pixels × 3) Lens 1.2 times zoom lens (powered) f 18.8 to 22.6 mm/F1.6 to 1.94 Lamp 165 W UHP Projected picture size (measured diagonally) 40 to 300 inches 40 to 150 inches (auto focus operation range) Light output ANSI lumen1) 2000 lm (When the Lamp Mode is set to "High.") Throwing distance (When placed on the floor.) 40-inch: 1.2 to 1.4 m (3.8 to 4.6 feet) 80-inch: 2.3 to 2.8 m (7.6 to 9.4 feet) 100-inch: 2.9 to 3.6 m (9.6 to 11.7 feet) 150-inch: 4.4 to 5.4 m (14.4 to 17.6 feet) 200-inch: 5.9 to 7.2 m (19.4 to 23.6 feet) 250-inch: 7.3 to 9.0 m (23.9 to 29.5 feet) 300-inch: 8.8 to 10.7 m (28.9 to 35.1 feet) There may be a slight difference between the actual value and the design value shown above. 1) ANSI lumen is a measuring method described in American National Standard IT 7.228. Electrical characteristics Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N/ PAL60 system, switched automatically/manually (NTSC4.43 is the color system used when playing back a video recorded in NTSC on a NTSC4.43 system VCR.) Resolution VPL-CX20: 750 horizontal TV lines (Video input) 1,024 × 768 dots (RGB input) 40 Specifications VPL-CS20: 600 horizontal TV lines (Video input) 800 × 600 dots (RGB input) Acceptable computer signals1) fH: 19 to 92 kHz fV: 48 to 92 Hz (Maximum input signal resolution: SXGA+ 1400 × 1050 fV: 60 Hz 1) Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector. Applicable video signals 15 k RGB/Component 50/60 Hz, Progressive component 50/60 Hz, DTV (480/60I, 575/50I, 480/60P, 575/50P, 720/60P, 720/ 50P, 1080/60I, 1080/50I), Composite video, Y/C video Speaker Monaural speaker system, 40 × 20 mm (1 5/8 × 13/16 inches) Speaker output 1 W (max.) Input/Output INPUT A HD D-sub15-pin (female) Analog RGB/component: R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: TTL level, positive/negative Horizontal sync input: TTL level Positive/negative VD: Vertical sync input: TTL level, positive/ negative AUDIO/VIDEO VIDEO: Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated) AUDIO: rated input 500 mVrms, input impedance 47 kilohms