Sony CXS-GT5516F Operating Instructions - Page 20
Adjusting setup items - SET, Press and hold the select button.
View all Sony CXS-GT5516F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Adjusting setup items - SET 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.* The setting is complete. 4 Press (BACK). The display returns to normal reception/play mode. * For CLOCK-ADJ and BTM settings, step 4 is not necessary. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 6) CT (Clock Time) Activates the CT function: "ON," "OFF" (page 11, 12). BEEP Activates the beep sound: "ON," "OFF." AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 21). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." REAR/SUB*1 Switches the audio output: "SUB-OUT" (subwoofer), "REAR-OUT" (power amplifier). DEMO (Demonstration) Activates the demonstration: "ON," "OFF." DIMMER Changes the display brightness: "ON," "OFF." ILLUM (Illumination) Changes the illumination color: "1," "2." M.DISPLAY (Motion Display) - "SA": to show moving patterns and spectrum analyzer. - "OFF": to deactivate the Motion Display. AUTO SCR (Auto Scroll) Scrolls long items automatically: "ON," "OFF." LOCAL (Local Seek Mode) - "ON": to only tune into stations with stronger signals. - "OFF": to tune normal reception. 20 MONO*2 (Monaural Mode) Selects monaural reception mode to improve poor FM reception: "ON," "OFF." ZAP TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 15 seconds)," "Z.TIME-3 (about 30 seconds)." ZAP BEEP (Zappin Beep) Has the beep sound between track passages: "ON," "OFF." LPF FREQ*3 (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency: "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." LPF SLOP*3 (Low Pass Filter Slope) Selects the LPF slope: "1," "2," "3." SW PHASE*4 (Subwoofer Phase) Selects the subwoofer phase: "NORM," "REV." HPF FREQ (High Pass Filter Frequency) Selects the front/rear speaker cut-off frequency: "OFF," "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." HPF SLOP (High Pass Filter Slope) Selects the HPF slope (effective only when HPF FREQ is set to other than "OFF"): "1," "2," "3." LOUDNESS (Dynamic Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." BTM (page 11) *1 When the unit is turned off. *2 When FM is received. *3 When the audio output is set to "SUB-OUT" or Rear Bass Enhancer is set to other than "OFF." *4 When the audio output is set to "SUB-OUT."