Sony D-EJ2000 Operating Instructions (primary manual) - Page 18
Connecting your CD player, Connecting a stereo system - operating manual
View all Sony D-EJ2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. to LINE OUT (OPTICAL) Optical digital connecting cord Connecting cord Left (white) Right (red) Notes • Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. • Use the AC power adaptor for recording. If you use the rechargeable battery or dry battery as a power source, the battery may become completely depleted during recording. • Adjust the volume properly on the connected device so that the sound will not be distorted. When using the connecting cord • You cannot adjust the volume of output from the i jack using VOL +/- on the CD player or the remote control. • If the sound is distorted, connect the device to the i jack. When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc., make sure that the CD player is in pause before operating the recording procedures. About the G-PROTECTION and SOUND functions when using the connecting cord or optical digital connecting cord • To record high quality CD sound, set the G-PROTECTION switch to "1." • The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT (OPTICAL) jack. MiniDisc recorder, DAT deck, etc. Stereo system, cassette recorder, radio cassette recorder, etc. 18