Sony D-EJ626CK Primary User Manual - Page 16
Replacing the fuse of the car battery cord, Notes on the car connecting pack, Remove, Plug end
View all Sony D-EJ626CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Replacing the fuse of the car battery cord If the CD player does not operate, check the fuse. If it is blown, replace it as follows: 1 Turn off the CD player and remove the cigarette lighter plug from the cigarette lighter socket. 2 Remove the plug end by turning it counterclockwise. 3 Remove the defective fuse from the plug. 4 Insert a new fuse into the plug. 5 Replace the plug end by turning it clockwise. Notes on the car connecting pack • If no sound is heard or the car connecting pack is ejected, change the direction of playback on the car cassette deck. • Never insert the cord end of the car connecting pack into the cassette insertion door. Otherwise, the cord may break or the car cassette deck may be damaged. • You cannot use the car connecting pack with some car cassette deck. • The cord should be placed so that it does not hinder driving. • To disconnect the cord from the player, pull it out by grasping the plug. Never pull the plug out by the cord. • With some car cassette decks, you may hear some rattling noise from the car connecting pack. However, this is not a sign of malfunction. Remove Fuse Plug end Cigarette lighter plug Notes • Be sure to use a fuse of the same amperage and length as the one to be replaced. Never use a piece of wire as a substitute for the fuse. • If the fuse is blown again after replacing it, contact your nearest Sony dealer. In such a case, bring the defective fuse to the dealer with you. 16