Sony D-M805 Operating Instructions primary manual - Page 11
Where, place, Discman, Sources, Using, power, adaptor
View all Sony D-M805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
►Installing in a Car Where to place your Discman • Install the Discman in a location which: - does not interfere with your driving. - is not dangerous for passengers. - does not interfere with the glove box lid or ashtray. - is stable, and where nothing around it may interfere with installation. • Do not install the Discman near heat sources or where subject to direct sunlight, excessive dust, or moisture (especially on a dashboard.) Please understand that we will not incur any obligations for troubles caused by incorrect installation. Mounting your Discman Attach the Discmari to the console box with the supplied Velcro tapes. Bottom of the Discman Console box Notes • Do not affix Velcro tapes to the name plate or the lid of the battery compartment. • When you are going to park your car for a long period of time, remove the Discman from the Velcro tapes so that it will not be exposed to direct sunlight. To route the cord Use the supplied spiral tube to route the cords so that they do not interfere with your driving. Notes • Be sure to use the supplied spare fuse. Never use a piece of wire as a substitute for the fuse. • If the fuse is blown again after replacing it, contact your nearest Sony dealer. In such a case, bring the supplied spare fuse to the dealer with you. Notes on the car connecting pack • If no sound is heard or the car connecting pack is ejected, change the direction of playback on the car cassette deck. • Never insert the cord end of the car connecting pack into the cassette insertion door. Otherwise, the cord may break or the car cassette deck may be damaged. • You cannot use the car connecting pack with some car cassette deck. • The cord should be placed so that it does not hinder driving. • To disconnect the cord from the Discman, pull it out by grasping the plug. Never pull the plug out by the cord. • With some car cassette decks, you may hear some rattling noise from the car connecting pack. However, this is not a sign of malfunction. ►Power Sources Using AC power adaptor Connect the supplied AC power adaptor to the DC IN 4.5 V jack and a wall outlet. to a wall outlet •r DC IN 4.5V