Sony D-NF610 SonicStage Simple Burner v1.0 Instructions - Page 32
If the installation was not successful, Tracks do not appear on the display - reset
View all Sony D-NF610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
If the installation was not successful • Be sure to close all Windows applications before you start the installation. t If you start the installation while other programs are running, a malfunction may occur. This is especially true for programs that require large amounts of system resources, such as virus-check software. • Make sure your computer has enough hard disk drive space. t 200 MB of free space or more on the hard disk drive is required. If your computer does not have enough space, installation may not be possible. • If the error message "Cannot be installed on this version of Windows" appears, t See "Providing the required system environment" on page 7. • If the installation is still unsuccessful after all that you have done, t The installation may be carried out by copying all files to the hard disk as follows: 1 Create a new folder on the hard disc. 2 Insert the supplied CD-ROM (SonicStage Simple Burner Ver.1.0) into the CD-ROM drive. 3 When the installation window appears, click [Exit] to cancel the installation. 4 Right-click the start menu and start up Explorer. 5 Select [SonicStage Simple Burner] on the CD-ROM drive, and then click [Edit]- [Select All]. 6 Click [Edit]-[Copy to Folder] (or [Edit]-[Copy]) to copy all files to the folder that you created in step 1. 7 Remove the CD-ROM from the CD-ROM drive, open the folder that was copied to the hard disk and double-click [setup.exe]. 8 When the installation window appears, follow the displayed instructions to install [SonicStage Simple Burner Ver. 1.0]. t The installation may also be carried out by installing the software from [Start]-[Run]. Tracks do not appear on the display • Is an audio CD inserted into the drive used for reading? t Insert an audio CD into the drive used for reading. t Setting of the drive used for reading is wrong. Click [CONFIG] and reset the designation of the drive to be used for reading to the drive where the CD is inserted. • Are the MP3 files included in the group selected? t Select a group where MP3 files are included. • Is the drive to be used for reading capable of digital music playback? t If not, an audio CD may not be recognized or the making of a disc image may be interrupted. Use a drive that is capable of digital music playback. 32