Sony DAV-C770 Operating Instructions - Page 23
Step 3: TV and Video Component Hookups
View all Sony DAV-C770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started Step 3: TV and Video Component Hookups Required cords Video cord for connecting a TV monitor Yellow Yellow Audio/video cords (not supplied) When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components. Yellow (Video) White (L/audio) Red (R/audio) Yellow (Video) White (L/audio) Red (R/audio) Jacks for connecting video components Connect a TV monitor VCR Digital satellite receiver To the MONITOR OUT jack VIDEO 1 jacks VIDEO 2 jacks z When using the S video jack instead of the video jacks Your TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the video signals and will not be output through the video jacks. z When using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the video jacks Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV accept progressive format file signals, you must use this connection and set "COMPONENT OUT" to "PROGRESSIVE" in "SCREEN SETUP" (page 70). Notes • When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks. • When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO mode, the line outputs may not function properly. • When "PROGRESSIVE" is selected in "SCREEN SETUP," no signal is output from the MONITOR OUT or SVIDEO OUT jacks. • When the mode of the system is set to "DVD," the signal is output from the S VIDEO OUT or COMPONENT OUT jacks. • When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the signal is output only from the COMPONENT OUT jacks. continued 23GB