Sony DAV-HDX274 Operating Instructions - Page 22
To quit the Quick Setup, To recall the Quick Setup display, DVD appears in the front panel
View all Sony DAV-HDX274 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Getting Started 10 Press . 11 Connect the calibration mic to the A.CAL MIC jack on the front panel. Set up the calibration mic at the ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. AUDIO IN / A.CAL MIC Calibration mic 12 Press C/c to select [YES]. Note • Make sure that the headphones are not connected to the unit. You cannot operate following Steps with the headphones connected. 13 Press . [AUTO CALIBRATION] starts. Be quiet during the measurement. Note • Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbors. 22US • Avoid being in the measurement area and making noise during the measurement (which takes about 3 minutes), as it may interfere with measurement. 14 Unplug the calibration mic and press C/ c to select [YES]. Note • The environment of the room in which the system is installed may affect measurements. • If measurement fails, follow the message then retry [AUTO CALIBRATION]. 15 Press . Quick Setup is finished. All connections and setup operations are complete. To quit the Quick Setup Press DISPLAY in any Step. Tip • If you change the position of the speakers, reset the speaker settings. See "Getting Optimal Surround Sound for a Room" (page 59) and "Calibrating the Appropriate Settings Automatically" (page 60). • If you want to change any of the settings, see "Using the Setup Display" (page 45). To recall the Quick Setup display 1 Press FUNCTION +/- repeatedly until "DVD" appears in the front panel display. 2 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 3 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 94( 99) 1( 1) T 0: 01: 08 DVD VIDEO CUSTOM CUSTOM QUICK 4 Press X/x to select [QUICK], then press . The Quick Setup display appears.