Sony DAV-HDX277WC Operating Instructions - Page 20
Prepare screws not supplied that are suitable for the hole on the back of each speaker. - calibration
View all Sony DAV-HDX277WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started - Subject to vibrations - Subject to direct sunlight • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. • Do not lean or hang on the speaker, as the speaker may fall down. Tip • When you change the positions of the speakers, Sony recommends that you change the settings. For details, see "Getting Optimal Surround Sound for a Room" (page 89) and "Calibrating the Appropriate Settings Automatically" (page 90). To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front speaker (L): White Front speaker (R): Red Center speaker: Green Surround speaker (L): Blue Surround speaker (R): Gray 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 4 mm (5/32 inch) 30 mm (1 3/16 inches) 5 mm (7/32 inch) 10 mm (13/32 inch) Hole on the back of the speaker 2 Fasten the screws to the wall. DAV-HDX277WC/DAV-HDX279W For the center speaker 145 mm (5 3/4 inches) For the other speakers 8 to 10 mm (11/32 to 13/32 inch) 8 to 10 mm (11/32 to 13/32 inch) 20US