Sony DAV-S300 Operating Instructions - Page 17
Presetting Radio Stations, Press ENTER.
View all Sony DAV-S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Presetting Radio Stations You can preset 20 stations for FM and 10 stations of AM. Before tuning, make sure that you have turned down the volume to the minimum. 5 Press ENTER. The station is stored. BAND PRESET +/- TUNING +/- ENTER 123 456 789 >10 10/0 MEMORY 1 Press BAND repeatedly until the band you want appears on the front panel display. Every time you press BAND, FM and AM changes alternately. 2 Press and hold TUNING + or - until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. "TUNED" and "STEREO" (for stereo program) appear on the front panel display. 6 Repeat Steps 1 to 5 to store other stations. To tune in a station with a weak signal Press TUNING + or - repeatedly in Step 2 to tune in the station manually. To change the preset number Start over from Step 1. To change the AM tuning interval The AM tuning interval is factory set to 10 kHz. To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. 3 Press MEMORY. A preset number appears on the front panel display. 4 Press PRESET + or - to select the preset number you want. 17