Sony DCR-DVD7E Operation Guide - Page 19
Getting Started, On the battery pack, On the charging/recording/playback time, On the AC Adaptor
View all Sony DCR-DVD7E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started On the battery pack • Before changing the battery pack, slide the POWER switch to OFF (CHG). • The CHG (charge) lamp may flash during charging, or BATTERY INFO (p. 33) may not be correctly displayed under the following conditions: - The battery pack is not inserted correctly. - The battery pack is damaged. - The battery pack is fully discharged. (For BATTERY INFO only.) • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the mains lead is disconnected from the wall socket. On the charging/recording/playback time • Times are measured at 25 °C (77°F). (10-30°C (50-86°F) is recommended.) • Available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. PRECAUTION • Even if your camcorder is turned off, AC power (mains) is still supplied to it while connected to the wall socket via the AC Adaptor. 19