Sony DCR-HC90E Operation Guide - Page 58
Dubbing/Editing, Connecting to a VCR or TV, A/V connecting cable supplied, VIDEO optional
UPC - 411378010063
View all Sony DCR-HC90E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Connecting to a VCR or TV Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p. 8). Refer also to the instruction manuals supplied with the devices to be connected. A/V jack A/V 1 AUDIO/ VIDEO jacks (Yellow) (White) (Red) VCRs or TVs To S VIDEO jack 2 DV To DV Interface : Signal flow A/V connecting cable (supplied) Connect the A/V connecting cable to your camcorder. The A/V jack works as an input as well as an output, switching automatically depending on the operational status. A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable (optional), pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable (optional). In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio. 58 To i.LINK (IEEE1394) jack 3 i.LINK compliant device i.LINK cable (optional) Use an i.LINK cable (optional) to connect your camcorder to another device. The video and audio signals are transmitted digitally, producing high quality pictures. Note that you cannot output the picture and sound separately. • Connect the A/V connecting cable to the output jack of a device you are dubbing a picture from, or to the input jack of another device for dubbing a picture from your camcorder. • When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video jack, and the red (right channel) or the white (left channel) plug to the audio jack on the VCR or the TV. • When you connect a device via an A/V connecting cable (supplied), set [DISP OUTPUT] to [LCD PANEL] (the default setting) (p. 55) to prevent the screen display dubbed with pictures.