Sony DCR-HC96 Operating Guide - Page 72
Dubbing to VCR/DVD device, etc. Continued, DCR-HC46/HC96
UPC - 027242688636
View all Sony DCR-HC96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Dubbing to VCR/DVD device, etc. (Continued) DCR-HC46/HC96: A/V or A/V OUT jack 1 AUDIO/VIDEO A/V jacks (Yellow) (White) (Red) To S VIDEO jack DV 2 To DV Interface (i.LINK) 3 VCR/DVD device, etc. To i.LINK jack : Signal flow A A/V connecting cable (supplied) For DCR-HC46/HC96: The Handycam Station and your camcorder are both equipped with A/V jacks (p. 84). Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup. B A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable, pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable. In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio. C i.LINK cable (optional) Use an i.LINK cable to connect your camcorder to another device equipped with an i.LINK jack. The video and audio signals are transmitted digitally, producing high quality pictures and sound. Note that you cannot output picture and sound separately. • When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video jack, and the red (right channel) or the white (left channel) plug to the audio jack on the VCR/TV. • When you connect a device via an A/V connecting cable, set [DISP OUTPUT] to [LCD PANEL] (the default setting) (p. 68). • While your camcorder is sending signals to another device via an i.LINK cable, appears on the LCD screen on your camcorder. 72