Sony DCR-SX83 Handycam® Handbook - Page 67
REPAIR IMG.DB F., To prevent data on the internal, recording media from being recovered
UPC - 027242788848
View all Sony DCR-SX83 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
the memory card from your camcorder (The access lamp is lit or flashing while formatting memory card.). To prevent data on the internal recording media from being recovered [EMPTY] allows you to write unintelligible data onto the internal recording media of the camcorder. In this way it may become more difficult to recover any original data. When you dispose of or transfer the camcorder, it is recommended that you perform [EMPTY]. When the internal recording media is selected on the [MEDIA FORMAT] screen, touch [EMPTY]. REPAIR IMG.DB F. See page 75, 77. Customizing your camcorder Notes Connect the AC Adaptor to the wall outlet (wall socket). You cannot perform [EMPTY] unless you connect the AC Adaptor to the wall outlet (wall socket). To avoid the loss of important images, they should be saved on a computer or other devices before performing [EMPTY]. Disconnect all cables except the AC Adaptor. Do not disconnect the AC Adaptor during the operation. While deleting data, do not apply any vibrations or shocks to your camcorder. The actual performing time for deleting data is as follows; DCR-SX83: about 2 minutes If you stop performing [EMPTY] while [Executing...] appears, be sure to complete the operation by performing [MEDIA FORMAT] or [EMPTY] when you use the camcorder next time. US 67