Sony DCRTRV19 Operating Instructions - Page 92
Dubbing only desired scenes - Digital program editing on tape, Operation 2: Performing Digital program editing, Dubbing the tape
UPC - 027242622050
View all Sony DCRTRV19 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Dubbing only desired scenes - Digital program editing (on tape) Operation 2: Performing Digital program editing (Dubbing the tape) The POWER switch should be set to . Operate by touching the panel. (1) When you use a digital video camera recorder, set the power switch of VCR to VCR/VTR. (2) Make sure your camcorder and the VCR are connected, and that the VCR is set to recording pause. When you use the i.LINK cable, this step is not necessary. (3) Press FN to display PAGE1. (4) Press MENU to display the menu. (5) Select VIDEO EDIT in , then press EXEC (p. 185). (6) Select TAPE, then press EXEC (DCR-TRV22/TRV33 only). (7) Press START. (8) Press EXEC. Search for the beginning of the first program, then start dubbing. The program mark flashes. The SEARCH indicator appears during searching, and the EDITING indicator appears during editing on the screen. When the dubbing ends, your camcorder and the VCR automatically stop. To cancel dubbing during editing Press CANCEL. To end Digital program editing Your camcorder stops when the dubbing is complete. Then the display returns to VIDEO EDIT in the menu settings. Press END to end the video edit function. When the program has not been set You cannot press START. You cannot record on the VCR in the following Indicator No indicator CHECK "i.LINK" & REC STATUS Cause • The write-protect tab on the cassette is set to lock. • The IR SETUP code is not correct. (When IR is selected.) • The button to cancel recording pause is not correct. (When IR is selected.) • i.LINK is selected but the i.LINK cable is not connected. • The power of the connected VCR is not turned on. (When i.LINK is selected.) 92