Sony DHG-M55CV Installation Guide - Page 23
TV and VCR with RF Connectors Only
View all Sony DHG-M55CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting the Digital Network Receiver TV and VCR with RF Connectors Only 1 Connect the coaxial cable from the wall outlet (Cablevision cable network signal) to the Digital Network Receiver's CABLE IN jack. 2 Connect the Digital Network Receiver's TO TV/VCR jack to the VCR's VHF/UHF IN (or RF IN) jack. 3 Connect the VCR's VHF/UHF OUT (or RF OUT) jack to the TV's VHF/UHF IN (or RF IN) jack. 4 Connect one end of the AC power cord to the Digital Network Receiver's AC IN jack, then connect the plug end to an AC outlet. 5 Set your VCR's channel switch (usually on the rear panel) to channel 3. Coaxial cable 1 2 From wall outlet VCR 4 AC cord 3 TV 17
Connecting the Digital Network Receiver
17
TV and VCR with RF Connectors Only
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver
’
s
CABLE IN
jack.
2
Connect the Digital Network Receiver
’
s
TO TV/VCR
jack to the
VCR
’
s
VHF/UHF IN
(or
RF IN
) jack.
3
Connect the VCR
’
s
VHF/UHF OUT
(or
RF OUT
) jack to the TV
’
s
VHF/UHF IN
(or
RF IN
) jack.
4
Connect one end of the AC power cord to the Digital Network
Receiver
’
s
AC IN
jack, then connect the plug end to an AC outlet.
5
Set your VCR
’
s channel switch (usually on the rear panel) to
channel 3.
AC cord
TV
VCR
Coaxial cable
From wall
outlet
4
2
1
3