Sony DPFVR100 Digital Photo Frame Handbook - Page 29
Sony DPFVR100 Manual
View all Sony DPFVR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Maintenance mode You can update the firmware of your photo frame or initialize its system in this mode. Tip Perform firmware update or system initialization of the photo frame in the following cases: Firmware update: Firmware update allows you to obtain optimum performance and use the photo frame with upgraded functions. System initialization: When your photo frame does not start properly, initialize the system of the photo frame. If the symptom persists, consult with your Sony dealer. firmware, access and view http:// www.sony.net/DPF. Initialize system: The operation screen is displayed. Go to "Initializing the system" below. Initializing the system 1 Press B/b to select [Yes] in the System initialization screen and press . Advanced operations Activating maintenance mode 1 2 Confirm that the photo frame is turned off. Press while holding down VIEW MODE on the photo frame to turn it on. Hold down VIEW MODE until the following screen appears. The system of the photo frame is initialized. Tip When system initialization has been executed, menu settings and mark information will be deleted, although the image and music data stored in internal memory of the photo frame will not be deleted. 2 When a completion message appears, press 1 (on/standby) on the photo frame to turn it off. Maintenance mode is activated. 3 Press v/V to select [Update firmware ] or [Initialize system] and press . Update firmware: For detailed information on how to obtain an update file or how to update the Continued 29 GB