Sony DPFVR100 Operating Instructions - Page 14
Sony DPFVR100 Manual
View all Sony DPFVR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Let's view an image PNote When using a memory card of the following types, make sure to insert it in an appropriate adaptor. If you insert it without an adaptor, you may be unable to remove it. As shown in the right-most illustration below, make sure to insert the following types of memory cards with inserted in the appropriate adaptor. Inserting a memory card Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame). CompactFlash card* (Slot A) xD-Picture Card (Slot B) SD memory card (Slot B) "Memory Stick" (Slot B) Access lamp 1miniSD/miniSDHC 1 miniSD/ miniSDHC adaptor 2microSD/microSDHC 2 microSD/ microSDHC adaptor 3"Memory Stick Micro" "M2" adaptor (standard size) "Memory Stick Duo" (Slot C) 3 "M2" adaptor (Duo size) When you insert a memory card The images on the memory card are automatically displayed. * A CompactFlash card can be used with the DPF-XR100 only. If you switch off the power while they are being displayed If you switch the power back on, the same images continue to be displayed. z Tip • S-Frame fails to auto rotate if: - An image file has been shot with a DSC which doesn't support Exif rotate tag recording. - An image file is retouched and saved with retouching software which breaks the Exif rotate tag. If the access lamp does not flash Reinsert the memory card after checking the label side of the memory card. About the B and C slots If you insert memory cards both into the B and C slots simultaneously, the photo frame will not work properly. 14 GB