Sony DPP-FP55 Quick Start Guide - Page 1

DPP-FP55 Quick Start Guide Follow the procedures in steps 1 through 6 to print an image from a "Memory Stick", "Memory Stick Duo", or SD card. For detailed explanations on operations and other printing methods, see the Operating Instructions. 1 Check the contents of the package. Items with * will be used for sample printing. Sample color printing pack * • 10 sheets of post card size print paper • A print cartridge for 10 prints For details, see page 10 on the operating instructions. Paper tray * AC adaptor (AC-S2425) * Cleaning cartridge Printer * AC power cord * • Operating Instructions • Quick Start Guide (this leaflet) * • Warranty (In some regions, the warranty is not supplied.) • Sony End User Software License Agreement • CD-ROM (Sony DPP-FP55 Printer Driver Software and Picture Motion Browser Ver. 1.1) Optional print packs For 4 x 6 inch (101.6 x 152.4 mm) post card size printing: SVM-F40P • 40 sheets of 4x 6 inch print paper (20-sheet-pack x 2) • Print cartridge for 40 prints SVM-F80P • 80 sheets of 4x 6 inch print paper (20-sheet-pack x 4) • Print cartridges for 40 prints x 2 SVM-F120P • 120 sheets of 4x 6 inch print paper (20-sheet-pack x 6) • Print cartridges for 40 prints x 3 © 2006 Sony Corporation Printed in China 2-682-266-12(1) 2 Prepare the necessary items for sample printing. 3 Load the print cartridge. Use the print cartridge designed for this printer. 1 Pull and open the cartridge compartment door. 4 Insert the print paper. 1 Open the eject paper tray (), and then slide () and lift open the paper tray lid (). 5 Connect to the AC power source. Insert one plug of the AC power cord to the wall outlet close-by and the other to the AC adaptor. Then connect the plug of the AC adaptor to the DC IN 24 V jack of the printer. To create a print like the sample above, prepare the items necessary for sample printing as marked with * in step 1: -Printer* -Sample print pack *(print paper and print cartridge) -AC adaptor* -AC power cord* -Paper tray* Note on print pack To make a print you need a print pack containing print paper and print cartridge. When the supplied sample print pack runs out, please purchase an optional print pack. 2 Insert the print cartridge in the arrow direction until it clicks into place. Arrow 3 Close the cartridge compartment door. 2 Set the print paper into the tray. Face the stamp marker to the paper feeding direction and toward the paper tray. Insert the protective sheet together with paper, and remove the protective sheet. Protective sheet Feeding direction 3 Close the paper tray door () and slide it to the paper feeding direction (). Keep the paper eject tray open. 4 Pull and open the printer's paper tray compartment door, and insert the paper tray into the printer. Insert it straight in until it reaches the end. To DC IN 24 V AC adaptor AC power cord To the wall outlet Go to step 6 