Sony DRU 700A Operating Instructions - Page 11
Determine which connection method you want to use, and then, adjust the jumper.
UPC - 027242649200
View all Sony DRU 700A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setup 2 Determine which connection method you want to use, and then adjust the jumper. Depending on whether you want to connect the drive as MASTER or SLAVE, place the jumper on the pins, as illustrated below. If you are unsure of the appropriate jumper setting, see "Appropriate Jumper Settings" on page 15. CS EL SLAVE MASTER CS EL SLAVE MASTER Jumper Jumper Notes • If installing the drive to replace one using the CSEL jumper setting, place the jumper on the CSEL pins of the drive before installing it. • Only place the jumper vertically, as illustrated. Placing the jumper horizontally may damage the drive and/or cause malfunctions. 11
11
Setup
2
Determine which connection method you want to use, and then
adjust the jumper.
Depending on whether you want to connect the drive as MASTER or SLAVE,
place the jumper on the pins, as illustrated below.
If you are unsure of the appropriate jumper setting, see “Appropriate Jumper
Settings” on page 15.
Notes
•
If installing the drive to replace one using the CSEL jumper setting, place the jumper on
the CSEL pins of the drive before installing it.
•
Only place the jumper vertically, as illustrated. Placing the jumper horizontally may
damage the drive and/or cause malfunctions.
Jumper
Jumper
SLAVE
CS EL
MASTER
SLAVE
CS EL
MASTER