Sony DRX-S70U-W Operating Instructions - Page 5

System Requirements - dvd

Page 5 highlights

Introduction System Requirements The drive should be used with a system that meets the following requirements1). ❑ PC/AT-compatible computer ❑ CPU: Pentium III 1.0 GHz or higher (Pentium 4, 2.0 GHz or higher recommended) ❑ 256 MB RAM or more (512 MB RAM for Windows Vista) ❑ 1 GB free hard disk space (10 GB for DVD creation) ❑ Operating system: Windows XP Home Edition SP3/ Windows XP Professional SP3 (referred to as Windows XP SP3), or Windows Vista Home Basic SP1/Windows Vista Home Premium SP1/Windows Vista Business SP1/Windows Vista Ultimate SP1 ❑ Hi-Speed USB (USB 2.0) port 1) The above requirements are the minimum necessary requirements to write to disc normally. Under actual operating conditions, the requirements imposed by your software must also be met. For details, refer to your software documentation. Notes • You must use discs that are compatible with the write speed you have selected. • Writing speed may automatically be adjusted depending on the disc, specified disc speed, or disc conditions such as weight imbalance and eccentricity. • When connected to a product that does not support Hi-Speed USB, there will be limitations on maximum transfer rate. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

5
Introduction
System
Requirements
The drive should be used with a system that
meets the following requirements
1)
.
PC/AT-compatible computer
CPU: Pentium III 1.0 GHz or higher
(Pentium 4, 2.0 GHz or higher
recommended)
256 MB RAM or more (512 MB RAM
for Windows Vista)
1 GB free hard disk space (10 GB for
DVD creation)
Operating system:
Windows XP Home Edition SP3/
Windows XP Professional SP3 (referred
to as Windows XP SP3), or Windows
Vista Home Basic SP1/Windows Vista
Home Premium SP1/Windows Vista
Business SP1/Windows Vista Ultimate
SP1
Hi-Speed USB (USB 2.0) port
1)
The above requirements are the minimum
necessary requirements to write to disc
normally. Under actual operating conditions,
the requirements imposed by your software
must also be met. For details, refer to your
software documentation.
Notes
You must use discs that are compatible with the
write speed you have selected.
Writing speed may automatically be adjusted
depending on the disc, specified disc speed, or
disc conditions such as weight imbalance and
eccentricity.
When connected to a product that does not
support Hi-Speed USB, there will be limitations
on maximum transfer rate.