Sony DSC-J10 Users Guide - Page 145
Shooting still images / movies
View all Sony DSC-J10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Cyber-shot User Guide Print Operation Search Before Use Shooting Viewing Using MENU items (Shooting) Using MENU items (Viewing) Changing settings Using with your computer Printing Troubleshooting Precautions / About this camera Contents list Top page > Troubleshooting > Troubleshooting > Shooting still images / movies Shooting still images / movies Cannot record images. Check the free capacity of the internal memory. Delete unnecessary images. [Details] You cannot record images while charging the flash. Set the mode switch to (Still Image) when shooting still images. Set the mode switch to (Movie) when shooting movies. Smile Shutter function does not work. No image is shot if a smiling face is not detected. [Details] The image is out of focus. The subject is too close. When shooting, make sure to position the lens farther away from the subject than the following minimum shooting distances: In Intelligent Auto, and Easy Mode: Approximately 1 cm (13/32 inches) (W), 50 cm (19 3/4 inches) (T) from the lens. In other recording modes: Approximately 8 cm (3 1/4 inches) (W), 50 cm (19 3/4 inches) (T) from the lens. Or set to Close focus mode and shoot about 1 cm to 20 cm (13/32 inches to 7 7/8 inches) from the W side. (Landscape), (Twilight) or (Fireworks) mode is selected in the Scene Selection when shooting still images. Zoom does not work. You cannot use the optical zoom in Sweep Panorama mode. You cannot use the Smart zoom depending on the image size. [Details] You cannot use the digital zoom when: The Smile Shutter is working. [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People]. Cannot select the Face Detection function. You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode is set to [Multi]. You cannot select Face Detection when the Close Focus mode is activated. The flash does not work. You cannot use the flash when: Burst mode is selected. [Details] 145