Sony DSC L1 Operating Instructions - Page 13
Charging the battery pack
UPC - 027242657625
View all Sony DSC L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Charging the battery pack Surface with the "InfoLITHUM" logo DC plug Getting started 1 Open the battery/"Memory Stick Duo" cover. Slide the cover in the direction of the arrow. • Be sure to turn off your camera when charging the battery pack (page 17). • Your camera operates with the "InfoLITHIUM" NP-FT1 battery pack (T type) (supplied). You can use only T type battery pack (page 118). 2 Battery eject lever Install the battery pack, then close the battery/"Memory Stick Duo" cover. Make sure the battery pack is firmly inserted all the way, then close the cover. Battery insertion slot Insert the battery pack so that tip of the marks on the side of the battery pack face the tip of the mark on the battery insertion slot. • The battery pack is easily inserted by pushing the battery eject lever toward the front of the camera using the tip of the battery pack. 3 Jack cover AC Adaptor Connect the AC Adaptor (supplied) to the DC IN jack of your camera. Connect the DC plug with the mark facing up. • Do not short the DC plug of the AC Adaptor with a metallic object, as this may cause malfunction. • Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack. 13