Sony DSC P10 Operating Instructions - Page 13
Using an external power source, Using your camera, abroad
UPC - 027242626515
View all Sony DSC P10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started Using an external power source Jack cover 2 To wall outlet (wall socket) DC plug 1 AC Adaptor , Open the jack cover and connect the AC-LS5 AC Adaptor (supplied) to the DC IN jack of your camera. Connect the plug with the v mark facing up. • Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). 1 2 Power cord (mains lead) , Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket). • When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera. • The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off. Using your camera abroad Power sources You can use your camera in any country or area with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. AC-LS5 • Do not use an electronic transformer (travel converter), as this may cause a malfunction. 13