Sony DSC-RX100M2COS Wi-Fi Connections/One-Touch (NFC) Guide - Page 2

Sending images to a smartphone (One-touch sharing (NFC)) 1 Install the latest version of PlayMemories Mobile on your smartphone. Android 2.3 ~ *Using One-touch functions (NFC), Android 4.0 ~ Note: For more information, refer to the following website. http://www.sony.net/pmm/ 2 Select an image on the camera to be sent and connect a smartphone to the camera. Note: Movies recorded in AVCHD format cannot be sent to a smartphone. iOS 4.3 ~ *One-touch functions (NFC) are not available Android/iOS not supporting NFC Android supporting NFC (One-touch sharing)  Playback an image to be sent to the smartphone.  MENU button  1 with   [Send to Smartphone]  [Select on This Device].  Select [This Image] with /, then press .  The SSID and password are displayed, and the camera is ready to be connected with the smartphone.  Playback an image to be sent to the smartphone.  Select [Settings] on the smartphone, then select [More...] to check that [NFC] is enabled. (This is only necessary the first time.) SSID Password Android  Start PlayMemories Mobile.  Select the SSID displayed on the camera.  Input the password displayed on the camera (first time only). iOS  Select [Settings] on the smartphone, then select [Wi-Fi] and select SSID displayed on the camera.  Input the password displayed on the camera (first time only).  Confirm connection to the SSID displayed on the camera.  Start PlayMemories Mobile. DIRECT-xxxx:DSC-xxx  Touch the smartphone to the camera.  Canceling sleep and the screen lock of the smartphone beforehand.  Make sure that the (N Mark) is displayed on the screen of the camera.  Continue touching without moving until "PlayMemories Mobile" starts (1-2 seconds).  Touch the N mark of the smartphone to (N Mark) of the camera. If there is no N mark on the smartphone, refer to the instruction manual of the smartphone for the touch area.  When not well connectable by NFC, see "Android/iOS not supporting NFC". 3 Images on the camera will be sent to your smartphone. Note: The sent image is stored in Gallery of Android, or Album of iOS. Using a smartphone as a remote controller (One-touch remote (NFC)) You can monitor the image to be captured and shoot with your smartphone. Select MENU  1  [Ctrl with Smartphone] on the camera in step 2 to set up the camera, or touch the N mark of the smartphone to (N Mark) at the bottom of the camera. Communication distance: Approx. 10m/33ft (line-of-sight) Note: Communication distance may vary, depending on your surroundings/ smartphone. For details on operations, refer to the Wi-Fi Guide. http://support.d-imaging.sony.co.jp/wi-fi/dsc/2013-2/