Sony DSC-RX10M2 Instruction Manual - Page 17

Inserting a memory card (sold separately), Open the cover., Insert the memory card.

Get Sony DSC-RX10M2 PDF manuals and user guides View all Sony DSC-RX10M2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Notes • The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera. • If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon ( ) displays on the monitor. • Do not remove the battery pack while power is being supplied from a wall outlet (wall socket). If you remove the battery pack, the camera will turn off. • Do not remove the battery pack while the access lamp (page 10) is lit. The data on the memory card may be damaged. • As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor. • Under certain conditions, power may be supplied from the battery supplementarily even if you are using the AC Adaptor. • While power is being supplied via USB connection, the temperature inside the camera will rise and the continuous recording time may be shortened. Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card. • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover. GB 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
GB
17
•
The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
•
If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon (
) displays on the monitor.
•
Do not remove the battery pack while power is being supplied from a wall outlet
(wall socket). If you remove the battery pack, the camera will turn off.
•
Do not remove the battery pack while the access lamp (page 10) is lit. The data on
the memory card may be damaged.
•
As long as the power is on, the battery pack will not be charged even if the camera
is connected to the AC Adaptor.
•
Under certain conditions, power may be supplied from the battery supplementarily
even if you are using the AC Adaptor.
•
While power is being supplied via USB connection, the temperature inside the
camera will rise and the continuous recording time may be shortened.
Notes
Inserting a memory card (sold separately)
1
Open the cover.
2
Insert the memory card.
• With the notched corner facing as illustrated, insert the memory card
until it clicks into place.
3
Close the cover.
Ensure the notched corner
faces correctly.