Sony DSC-T2/P Instruction Manual - Page 36
Troubleshooting, Battery pack and power - pdf
View all Sony DSC-T2/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Troubleshooting If you experience trouble with your camera or accessory, try the following solutions. 1 Check the items below, and refer to "Cyber-shot Handbook" (PDF). If a code such as "C/E:ss:ss" appears on the screen, refer to "Cyber-shot Handbook". 2 Remove the battery pack, wait for about one minute, re-insert the battery pack, then turn on the power. 3 Initialize the settings (page 24). 4 Consult your Sony dealer or local authorized Sony service facility. On repairing cameras with internal memory or Music files function included, data in the camera may be checked on minimum necessity to verify and improve the malfunction symptoms. Sony will not copy or save any of those data. Battery pack and power Cannot insert the battery pack. • Insert the battery pack correctly to push the battery eject lever (page 12). Cannot turn on the camera. • After inserting the battery pack into the camera, it may take a few moments for the camera to power up. • Insert the battery pack correctly (page 12). • The battery pack is discharged. Insert charged battery pack (page 11). • The battery pack is dead. Replace it with a new one. • Use a recommended battery pack (page 9). The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again (page 14). • The battery pack is dead. Replace it with a new one. 36