Sony DSC T200 Instruction Manual - Page 12

To check the remaining battery charge, To remove the battery pack/Memory Stick Duo, Battery - screen

Page 12 highlights

[ To check the remaining battery charge Press POWER button to turn on and check the remaining battery on the LCD screen. Battery remaining indicator Battery remaining guidelines Sufficient power remaining Battery almost fully charged Battery half full Battery low, recording/ playback will stop soon. Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.) • If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the battery remaining indicator. • It takes about one minute until the correct battery remaining indicator appears. • The displayed battery remaining indicator may not be correct under certain circumstances. • The Clock Set screen appears when the camera is turned on for the first time (page 13). [ To remove the battery pack/"Memory Stick Duo" Open the battery/"Memory Stick Duo" cover. "Memory Stick Duo" Battery pack Make sure that the access lamp is not lit, then push the "Memory Stick Duo" in once. Slide the battery eject lever. Be sure not to drop the battery pack. • Never remove the battery pack/"Memory Stick Duo" when the access lamp is lit. This may cause damage to data in the "Memory Stick Duo"/internal memory. • Use the NP-BD1 battery pack (supplied) only with this camera. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

12
[
To check the remaining battery charge
Press POWER button to turn on and check the remaining battery on the LCD screen.
• If the NP-FD1 battery pack (not supplied) is used, the minute display (
60 Min) is also shown after
the battery remaining indicator.
• It takes about one minute until the correct battery remaining indicator appears.
• The displayed battery remaining indicator may not be correct under certain circumstances.
• The Clock Set screen appears when the camera is turned on for the first time (page 13).
[
To remove the battery pack/“Memory Stick Duo”
Open the battery/“Memory Stick Duo” cover.
• Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage
to data in the “Memory Stick Duo”/internal memory.
• Use the NP-BD1 battery pack (supplied) only with this camera.
Battery
remaining
indicator
Battery
remaining
guidelines
Sufficient
power
remaining
Battery
almost fully
charged
Battery half
full
Battery low,
recording/
playback
will stop
soon.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
Slide
the battery eject lever
.
Be sure not to drop the battery pack.
Make sure that
the access lamp
is not lit,
then push the “Memory Stick Duo” in once.
Battery pack
“Memory Stick Duo”