Sony DSC-TX10 Instruction Manual - Page 13
Charging by connecting to a computer, Connect the AC Adaptor to the wall outlet wall socket. - cable
UPC - 027242813113
View all Sony DSC-TX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1 Open the connector cover and connect the camera and the AC Adaptor (supplied), using the multi-use terminal USB cable (supplied). 2 Connect the AC Adaptor to the wall outlet (wall socket). The Power/Charge lamp lights orange, and charging starts. • Turn off the camera while charging the battery. • You can charge the battery pack even when it is partially charged. GB • When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack. Notes • Close the cover securely, so that the yellow mark under the slide lock is hidden. • When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is connected to the camera and the wall outlet (wall socket), it indicates that the charging stops temporarily on standby. The charging stops and enters the standby status automatically when the temperature is outside of the recommended operating temperature. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF). • Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect the power source. • When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket). • Be sure to use only genuine Sony brand battery packs, multi-use terminal USB cable (supplied) and AC Adaptor (supplied). x Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a multi-use terminal USB cable. GB 13