Sony DSJ301 Operating Instructions - Page 20
Maintenance, To clean the casing, To clean the headphones, earphones plug, To remove any dust or sand
UPC - 027242592421
View all Sony DSJ301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Precautions • The supplied headphones are not meant to be immersed in water or come in continuous contact with water. If they are accidentally dropped into water or get wet, dry them with a soft cloth. Never use an electric hair dryer. • The supplied AC power adaptor is not water resistant. To prevent shock hazard, avoid using the player near water during AC operation. • Cover the DC IN 4.5 V jack and i jack with the attached rubber caps when nothing is connected to these jacks. If the inside of the jacks are contaminated with water or sand, rust may develop and cause trouble. Notes • Since the unit is airtight, you may not be able to open the lid when there is a sudden change in air pressure inside the unit. This happens when the unit is transported on a plane or moved from a warm place to a cold place. In this case, open the rubber cap on the DC IN 4.5 V jack. • To prevent water from leaking in, the buckle is designed to be slightly stiff. Be careful not to catch a fingernail on the buckle when unfastening the lid. Maintenance To clean the casing Use a soft cloth slightly moistened in water or a mild detergent solution. Do not use alcohol, benzine or thinner. To clean the headphones/ earphones plug Keep the plug of your headphones/earphones clean to obtain optimum sound. Wipe it with a dry, soft cloth. To remove any dust or sand from the rubber packing Any sand or dust on the rubber packing will prevent the lid from shutting tightly, and water may leak in. Brush off the dust once in a while. We recommend the replacement of the rubber packing every year which is available optionally at an authorized Sony service facility. Do not hold the player with the buckle by itself. Doing so may damage the unit. 20