Sony DSLR-A200 Instruction Manual - Page 82
Setting ISO, Press the ISO button to display, the ISO screen., Select the desired value
View all Sony DSLR-A200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1 Press the ISO button to display the ISO screen. ISO button 2 Select the desired value with v/V on the controller. • The larger the number, the higher the noise level. Notes • When ISO is set to [AUTO], ISO is automatically set as follows. Recording mode AUTO, Scene Selection P, A, S ISO The range differs depending on the mode 100 - 400 • The [AUTO] setting is not provided in recording mode M. If you change the recording mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO according to your shooting conditions. 82
82
Setting ISO
Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.
Notes
• When ISO is set to [AUTO], ISO is automatically set as follows.
• The [AUTO] setting is not provided in recording mode M. If you change the
recording mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO
according to your shooting conditions.
1
Press the ISO button to display
the ISO screen.
ISO button
2
Select the desired value with
v
/
V
on the controller.
•
The larger the number, the higher the noise level.
Recording mode
ISO
AUTO, Scene Selection
The range differs depending on the mode
P, A, S
100 – 400