Sony DSLR-A300 Instruction Manual - Page 33
Detach the lens Use the blower to clean the image, sensor surface and the, surrounding area.
View all Sony DSLR-A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Preparing the camera 5 Detach the lens (page 20). 6 Use the blower to clean the image sensor surface and the surrounding area. • Do not touch the image sensor with the tip of the blower. Complete the cleaning quickly. • Hold the camera's face downward to prevent the dust from resettling in the camera. • When cleaning the image sensor, do not put the tip of a blower into the cavity beyond the lens mount. 7 Attach the lens and set the POWER switch to OFF. Note • The camera starts beeping if the battery pack becomes low during cleaning. Stop the cleaning immediately and set the POWER switch to OFF. 33
33
Preparing the camera
Note
•
The camera starts beeping if the battery pack becomes low during cleaning. Stop the
cleaning immediately and set the POWER switch to OFF.
5
Detach the lens (page 20).
6
Use the blower to clean the image
sensor surface and the
surrounding area.
•
Do not touch the image sensor with the
tip of the blower. Complete the
cleaning quickly.
•
Hold the camera’s face downward to
prevent the dust from resettling in the
camera.
•
When cleaning the image sensor, do not
put the tip of a blower into the cavity
beyond the lens mount.
7
Attach the lens and set the POWER switch to OFF.